|
Post by CSS_Hayzee on Mar 15, 2011 13:05:44 GMT -5
Oh I see now...yeah, thats weird. Says occured in the past on the header, but at top of the page the time is correct. Something aint right!!! Mission planner maybe thinks clock advanced???
|
|
|
Post by 4shades on Mar 15, 2011 18:53:13 GMT -5
Hi guys,
You are correct - there is something wrong with the campaign state at the moment. It can be fixed, but I cannot do it for 12 hours (day job etc).
Cheers, 4Shades
|
|
|
Post by 4shades on Mar 16, 2011 9:53:10 GMT -5
Database has been corrected and the MP is ready to go. I cannot guarantee that I have done everything perfectly, but there seems to be a reasonable battle map with time synchronization there now. If there are major problems, please let me know.
Cheers, 4S
|
|
|
Post by LW/JG10_Luny on Mar 16, 2011 15:38:27 GMT -5
Thank you, sir
|
|
|
Post by JG26_Nuke on Mar 28, 2011 17:07:48 GMT -5
The commander notices in the mission planner can sometimes not be seen, if the list is too long, then the popup is expanding upwards, outside the edge of the browser. I managed to get that list to follow the cursor somehow but couldn't repeat it, only by accident. I can, of course, get the popup, ctrl+a (select all) then copy-paste into a notepad, but it is a bit less convenient.
|
|
|
Post by 4shades on Mar 28, 2011 18:34:16 GMT -5
You are right, this tooltip needs coding attention. Happily, I have already revised it for the next SEOW version. But for this France campaign we will just have to tolerate it unfortunately.
Cheers, 4Shades
|
|
|
Post by JG26_Nuke on Apr 29, 2011 12:38:29 GMT -5
The factory productivity shows the points produced per mission, despite it says per hour.
|
|
|
Post by JG26_Badger on May 14, 2011 16:44:25 GMT -5
4shades: Notice a few errors in the analyze mode, seems that the database is not updating once the mission was reported today Mission 37. I can send both log file and mission file if needed. Also some anomalies occured after the 300hr mission as well. Thanks for all your assitance and support. Badger
|
|
|
Post by JG26_Nuke on May 27, 2011 7:33:05 GMT -5
Some really low-priority notices:
1) The wind direction indicator in the compass is pointing to the direction where the wind is blowing from. I believe it'd be more logical if it was pointing in the other direction (+180°), where the wind is blowing to.
2) Only airbases show the penalties a plane took for not landing at destination / combat damage. When one hovers the mouse over a control point, and a penalized aircraft is nearby, it doesn't show the penalty marks.
|
|
|
Post by JG26_Badger on May 27, 2011 13:13:46 GMT -5
@nuke:
These are not SEOW errors or bugs, if you took the time to read the 4.10 documentation you would see the Wind direction is as per aviation standards and is entered as where the wind is blowing from. A westerly wind is entered as 270. 4Shades just put that in as it should be. As a pilot you need to know what direction you are flying if the wind is 270 and you are flying west then you have a head wind, if you are flying east then you would have a tailwind.
Control Points are only used to define key locations and they display units that are within the defined radius. There would be no reason to display and aircraft landing penalty at the control point when this information is already displayed in the mission planner in two locations. AC landing penalties are already displayed in the info tab and at the airbase for the effective unit. No need for another in my opinion.
|
|